Hunter backs its fans with a life limited motor warranty, and backs that warranty with nearly 120 years in the ceiling fan business. No other manufacturer has that sort of record to stand on. So you have the peace of mind of knowing you have the best-backed warranty in the business!
The very first thing you need to be sure of is that the fan you buy is actually made for outdoors. You might not know that, but ceiling fans are in fact created for indoor/outdoor use. Outdoor fans are actually given particular ratings like moist or wet evaluations, and if you are going to be installing your ceiling fan at which the components can access to it, you had better be certain that your fan is ranked as such.
The heating effect will more than compensate for the decrease in the air conditioning and ought to maintain adequate cooling during the day hours. In the early hours, when you feel the temperature climbing into a mildly uncomfortable level, adjust the thermostat down several notches to raise using this air conditioning unit whilst leaving the ceiling fans around.
Without going into great detail, so be sure that all of the screws are tight. If they aren’t tighten the ones that have come loose and run the fan. If the wobbling has stopped, your problem was solved.
Even though this is a somewhat time-consuming process, it will solve the problem when all else fails. Incidentally, if the producer didn’t supply any clips you can normally buy these clips in a home center or big hardware store. If you prefer, you can improvise by putting a coin or other small weight on the top of the blade and anchoring it with a little bit of electrical tape. Ideally it is very clear that a knockout post is something that can have quite an impact on you and others, too. There are so many possibilities and variations – twists and turns, that maybe you see how difficult it can be to cover all bases. But I wanted to pause for a moment so you can reflect on the value of what you have just read. This is the sort of content that people need to know about, and we have no problems stating that. Our final few items can really prove to be highly effective considering the overall.
First things first, however, let’s cover some very basic thoughts about ceiling fan installation before we delve more deeply to the directions. Before you do anything, you want to choose a location for your fan. Usually, people select the center of the ceiling. Additionally they frequently replace a light fixture. If you are installing a fan with NO light then you need to be fine and the circuit won’t overload. But if you are installing a fan WITH lights, then you need to make sure that the circuit has sufficient capacity for the new load. If there’s no current central lighting fixture then you are going to need to designate a place to hang the fan.
Wipe the dust accumulated in the ceiling fan, using a soft or moist cloth. To preserve the glow of the paint, avoid using detergents and additives to wash out the fan. Avoid applying too much pressure when you’re cleaning the fan as it might alter the angle of the blades.
Next, measure the floor-to-ceiling space then subtract the distance which the fan will take up. 7 ft is overall recommended but be sure to check on your local building codes and regulations. If your ceilings are going to be too low and they’re creating a problem then you might want to consider getting a low-ceiling bracket. That will help. Some fans include blades that correct quite a bit. (Note: 12 inches between the ceiling and the fan will allow for good airflow but 18 inches is recommended and, if possible, best.) Various ceiling fan options are available at different ecommerce stores.
In our years working in this area we have come to find out that many individuals don’t have any clue how to install a ceiling fan. To be clear, it is not an EASY undertaking. However, it’s also not terribly tough. You just have to take your own time, follow the manufacturer’s instructions and keep cool and collected. That is what we are here to help you do!
Safety standards state that the min height from the ground to the base of the fan blades should be 2.3m or 7ft 6″, consider Hunter Low Profile ceiling fan if you have a very low ceiling, only really ensure that they are above head height.
If it begins to get colder outside, change your ceiling fan so that it rotates clockwise. This pushes the warm air from the ceiling region downward and increases the temperature of the room. The thermostat registers that the increase in temperatures and thus cycles your furnace less often.